v/ usr/ var/
62 ls
63 ls
64 lftp 192.168.1.67
65 lftp 192.168.1.200
66 ls
67 mv keyboard_layout-0.1-1.lp.i386.rpm xfce4-xkb-plugin-... board.tar.bz2 etc/ usr/
101 ls
102 lftp 192.168.1.67
103 ls
104 ls
105 cd ..
106 ls
... 122 cd switch_monitor/
123 ls
124 lftp 192.168.1.200
125 lftp olpc:olpc@192.168.1.200
126
e else can fill that in.
Test:
X :1 -query 192.168.123.168
Magic Cookies etc:
<code> http://www.uni-kiel....
--------------|Crossover|--------------|
192.168. eth0|---------|eth0 192.168. |
1.1 | | 1.10 |
| | |
192.168. | DHCP | 192.168. |
2.100 eth1|-router--|eth1 2.101 |
... .conf resolv.conf
nameserver 192.168.2.1 nameserver 192.168.1.1
Ich habe das Problem mitlerweile gelöst, al
r 3CRWDR100-72 HTTP (none) admin Admin http://192.168.1.1
3Com Internet Firewall 3C16770 HTTP admin pa... ) -10 HTTP Manager friend Admin Default IP is 192.168.242.242
Allnet ALL0275 802.11g AP 1.0.6 HTTP non... ny HTTP admin admin Admin Web interface is on 192.168.1.254 available on the LAN ports of the AP.
Ando... WLA-G54 WBR-G54 HTTP root (none) Admin http://192.168.11.1
CISCO Cache Engine Console admin diamond Ad
Adresse 192.168.0.10 setzen
<code>ip addr add 192.168.0.10/24 broadcast 192.168.0.255 dev eth0</code>
* IP 192.168.0.10 löschen... für die IP 192.168.0.10
<code>ip route add to 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10</code>
* Routingtabelle anzeigen
<code>ip ... 0/24</code>
* Default Route setzen (Gateway 192.168.0.1) für die IP 192.168.0.10
<code>ip route add to default via 192.168.0.1 src 192.168.0.10</code>
* Default Route löschen
<code>ip route de
OUTING -o eth1 -s 192.168.1.0/24 \
-d 192.168.1.100 -j SNAT --to 192.168.1.1
iptables -A FORWARD -s 192.168.1.0/24 -d 192.168.1.100 \
-i eth1 -o eth1 -m state
--state NEW,ESTA... -dport 3128 -j ACCEPT
iptables -A FORWARD -d 192.168.1.0/24 -s 192.168.1.100 \
-i eth1 -o eth1 -m state --state ... rk except from the Squid server at IP address 192.168.1.100 is redirected to the Squid server on port 3
resses within a larger network.
For example, 192.168.0.0/28 will allow the first 16 IP addresses, from 192.168.0.0 to 192.168.0.15, to access the exported filesystem but not 192.168.0.16 and higher.
netgroups - Permits an NIS net... t install nfs-common</code>
etc/fstab:
<code>192.168.123.95:/var/files /home/gerald/Server/files ... exec,nosuid,rw,rsize=8192,wsize=8192 0 0
192.168.123.95:/var/pictures /home/gerald/Server/pictures
art)
NIS: (Network information server):
NISIP 192.168.123.95 (war: 127.0.0.1)
NISPORT 3551</code>
Wenn... set it up to that subnet address, for example 192.168.10.0
# Additionally you can listen for a single IP like 192.168.10.1
#NISIP 127.0.0.1
NISIP 192.168.123.95
# NISPORT <port> default is 3551 as registered with the IA
_0 V2.0 ESP0). Passwort: configesp
IP-Adresse 192.168.4.1 (oder 2.1)
https://waschto.eu/easyesp/
====... rd IP (bei Neuinstallation mit eigenem WLAN): 192.168.4.1
Drücken Sie nach der Installation 4 mal kurz... bietet einen Access Point mit der IP-Adresse 192.168.4.1 und einen Webserver, der die Konfiguration vo... Das Gerät stellt ein Acces Point unter der IP 192.168.4.1 bereit. Sobald ihr euch mit diesem verbindet,
