(ESP_0 V2.0 ESP0). Passwort: configesp
IP-Adresse 192.168.4.1 (oder 2.1)
https://waschto.eu/easyesp/
... andard IP (bei Neuinstallation mit eigenem WLAN): 192.168.4.1
Drücken Sie nach der Installation 4 mal ... und bietet einen Access Point mit der IP-Adresse 192.168.4.1 und einen Webserver, der die Konfiguratio... ff. Das Gerät stellt ein Acces Point unter der IP 192.168.4.1 bereit. Sobald ihr euch mit diesem verbin
gt der Sniffer unverschlüsselt an, z.B.:
<code>
T 192.168.0.1:33509 -> 192.168.0.2:2000 [AP]
das ist ein test.
</code>
Nun machen wir einen SSH-Tunnel dra... g ist verschlüsselt, wie ngrep mitteilt:
<code>T 192.168.0.1:33522 -> 192.168.0.2:22 [AP]
.0R.j.C..x7.......r.B.h...[..Q.G{.._...f,C<.7C9H
tmutil setdestination afp://TimeMachine:password@192.168.123.4/TMBackup</code>
Or:
Here's what work... ommand-K)
* Type in your NAS's IP address (e.g. 192.168.1.xxx)
* At the logon prompt, use "TimeMach
network, while always restricting access to host 192.168.1.23.
<code>#
# Add this to the bottom of th... ACL section of squid.conf
#
acl home_network src 192.168.1.0/24
acl business_hours time M T W H F 9:00-17:00
acl RestrictedHost src 192.168.1.23
#
# Add this at the top of the http_acc... ACL section of squid.conf
#
acl home_network src 192.168.1.0/24
acl business_hours time M T W H F 9:00
ter adding this entry.
Cool test
ping -c 2 -b 192.138.0.255 | sort
arp -a
If your dhcpd.leases fil... tocol = udp
wait = yes
user = root
only_from = 192.168.1.1
server = /usr/sbin/in.tftpd
server_args... he router / switch / firewall
with an address of 192.168.1.1. You can extend this list with commas in ... meone else can fill that in.
Test:
X :1 -query 192.168.123.168
Magic Cookies etc:
<code> http://w
networking environment that'll be something like 192.168.1.X (assuming your router's IP is 192.168.1.1), where "X" can be any number from 2 to 255. Don't p... o try is the machine's webserver, which is http://192.168.1.X web address. If everything is set up righ... ks something like this:
The web page at http://192.168.1.X ('X' is the number you assigned),
showin
ult Setup
The default IP address of the camera is 192.168.0.9 netmask 255.255.255.0
You should be able... ngs (additional IO board 10349 is needed)
Speed: 19200 8N1
RTS/CTS: None
XON/XOFF : None
Changing I