amera.jpg");;fhem("set nt.Klingel inactive;set HUEDevice16 blink 3;sleep 10;set nt.Klingel active;") }
=... Cmd widgetOverride
attr global autoload_undefined_devices 1
attr global logfile ./log/fhem-%Y-%m.log
attr ...
WEB,WEBphone,WEBtablet has no associated allowed device with basicAuth.\
telnetPort has no associated allowed device with password/globalpassword.\
\
Restart FHEM for
# luksformat -t ext3 /dev/hda3
creating encrypted device on /dev/hda3
WARNING!
========
Daten auf /dev/hd... Schlüssel angegeben. cryptsetup konfiguriert den Device Mapper entsprechend, so daß dieser die verschlüss... e auf /dev/mapper/hda3_crypt laufen nun durch den Device Mapper. Erfolgt ein Schreibzugriff auf hda3_crypt... die Verschlüsselung, es verwendet einfach das vom Device Mapper erstellte Gerät wie eine normale Partition
ch as memory, disks, and other input/output (I/O) devices for the user's benefit.
Linux drivers, the programs that manage each I/O device, are the staff that keeps all the government depa... e years the Linux kernel has evolved, in the past device drivers were included as part of this core progra... ase kernel remains unchanged.
* An error in a device driver is less likely to cause a fault that preve
3:16:46 kuskus kernel: usb 1-1: new low speed USB device using uhci_hcd and address 3
Apr 25 13:16:47 kusk... 5 13:16:48 kuskus kernel: hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS CS 350 FW:807... tion for more details).
# You must also specify a DEVICE, sometimes referred to as a port.
# For USB UPSes, please leave the DEVICE directive blank. For
# other UPS types, you must
pcap.htm
The CACE AirPcap USB device allows native capture on
Win... pcap.htm
The CACE AirPcap USB device allows native capture on
Win... The airpcap_ask source lists available airpcap devices
and allows the user to pick... B43 broadcom drivers for current Broadcom devices in
Linux kernels
b43le
s working better … now lets start by checking the device detected ..
<code>
gerald@gerald-kubuntu:~$ lsusb
Bus 004 Device 002: ID 05e3:070e Genesys Logic, Inc. X-PRO CR20xA USB 2.0 Internal Card Reader
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 005: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
Bus 003 De
bled by default - then change to:
root # cd /sys/devices/system/cpu/cpu0/cpufreq/
cpufreq # ls
affected_... ed at every boot.
sleep 60
echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
http:/...
modprobe cpufreq_powersave
echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
Skrip... IA ONLY
# made by Gerald Pienkowski
SYSPATH=/sys/devices/system/cpu/cpu0/cpufreq/
# Define some decent d
You can use the hcitool to scan for bluetooth devices in range and get their bluetooth address. Press ... --search
Searching ...
Connecting to device 00:07:61:64:A2:98</code>
Or use the bluetoot... lines to xorg.conf. Somewhere near the other InputDevice sections add:
<code>Section "InputDevice"
Identifier "Wiimote"
Driver
).
These are KMobileTools configuration options:
Device
Here you can set your device that will be used for connection with your mobile, for instance /dev/rfcomm0 (Bluetooth), /dev/ttyACM0 or /dev/ttyUSB0 (USB devices) or /dev/ttyS0 (serial port).
Mobile Phone
Here ... see the level you are connected with your mobile device.
Use: /dev/ttyACM0
1) kbluetoothd, bluez-* un
the changes, with "Yes".
# Now pick "Create MD device".
# Use RAID1 and give the number of active and spare devices (2 and 0 in our case).
# In the following menu, select the same device number on the first and second disk and Continue.
# Repeat this step for every two devices until you are done. Then use "Finish" from the M
toring over MQTT for both relay and roller modes. Device mode, along with other parameters need to be conf... Shelly2.5 reports:
shellies/shellyswitch25-<deviceid>/input/<i> for each SW input <i>; reports the c... state as 0 or 1
shellies/shellyswitch25-<deviceid>/longpush/<i> for each SW input <i>; reports a ... state as 0 or 1
shellies/shellyswitch25-<deviceid>/temperature reports internal device temperatur
====== Ext. USB-Laufwerkdevices eindeutig zuordnen ======
===== Problem =====
Während man 'normale' exter... werke eindeutig mounten kann (z.B. mit UUID statt devices in der /etc/fstab), funktioniert das mit cryptse... ===
Dem Laufwerk/Partionen über eine Regel feste devices in /dev/ zuweisen. Dann weiß cryptsetup, was es ... ck (oder auch eine Festplatte) immer den gleichen Device Namen zugewiesen bekommt, kann man sich eine Udev
