Webdav & FTP auf ein Verzeichnis

Die Idee ist, ein Verzeichnis so einzurichten, dass man per FTP und Webdav auf diesen Verzeichnis lesend & schreibend zugreifen kann.

Dabei sollen beide Server auf das gleiche Passwort-File zugreifen, um doppelte Pflege der Datei zu verhindern.

Es wird hier kein Wert darauf gelegt, dass sich mehrere Nutzer auf verwsch. Verz. einloggen können. Vielmehr loggen sich alle Nutzer in des selbe Verzeichnis ein. Die Nutzer können jedoch versch. Passwörter haben.

Als Webdav soll das Webdav-Modul von Apache2 zum Einsatz kommen. Webdav soll schon eingerichtet sein. Anleitung hier

Als FTP-Server kommt VSftpd zum Einsatz. Anleitung hier.

Das gemeinsame Passwort-File ist:

/var/www/webdav-ftp-password

Anzulegen ist die Datei z.B. für User Gerald mit

htpasswd -c /var/www/webdav-ftp-password gerald

(Weitere User ohne -c). Die Datei sollte natürlich nicht für Webuser lesbar sein, sondern nur für Root (mein Webserver liegt nicht direkt unter /var/www/).

Der gemeinsam zu nutzende Ordner liegt in unserem Beispiel unter /var/www/webserver/webdav/

Webdav

Der Webdav verwendet normalerweise zur Authentifizierung Digest, vom PW wird nur der Hash übertragen. Wir 'downgraden' zu Basic mit einer Übertragund in Klartext. Allerdings können wir bei Webdav & FTP auf verschl- Verbindung zurückgreifen, um das Problem zu entschärfen.

Downgraden von Digest in Basic:

Änderungen in: /etc/apache2/sites-enabled/000-default

        <Location /webdav>
           DAV On
#           AuthType Digest
           AuthName "WebDav"
           AuthType Basic
           AuthUserFile /var/www/webdav-ftp-password
           Require valid-user
       </Location>

Evt. mod_auth_pam + mod_perl installieren:

apt-get install libapache2-mod-auth-pam
apt-get install libapache2-mod-perl2

FTP vsftpd

Erklärung der Parameter

Funktionierende /etc/vsftpd.conf:

# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
virtual_use_local_privs=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
chown_uploads=YES
chown_username=www-data
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=800
#
# You may change the default value for timing out a data connection.
data_connection_timeout=180
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to Foto-und-Kind.de FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=YES
local_root=/var/www/webserver/bilder
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default.  These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
guest_enable=YES
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/vsftpd.pem
#user_config_dir=/var/www/users-ftp

#check_shell=NO
#ftp_username=www-data
#guest_username=nobody

Der Punkt pam_service_name=vsftpd bezieht sich darauf, welche Conf-Datei für die Authorisierung zuständig ist. Also: /etc/pam.d/vsftpd. Die sieht so aus:

# Standard behaviour for ftpd(8).
#auth   required        pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed
auth    required        pam_pwdfile.so pwdfile /var/www/webdav-ftp-password
account required        pam_permit.so

# Note: vsftpd handles anonymous logins on its own.  Do not enable
# pam_ftp.so.

# Standard blurb.
#@include common-account

#@include common-session

#@include common-auth
#auth   required        pam_shells.so

Alles aufkommenieren und die beiden Zeilen einfügen. Dabei drauf achten, dass es das Modul pam_pwdfile.so auch wirklich gibt (siehe weiter unten).

Probleme


Nach login: 500 OOPS: cannot locate user entry

Er findet die Umgebungsvariablen des User nicht, weil es den User gar nicht gibt (nur virtuell).

Wenn es den User in echt gibt, der in der Passwort-Datei steht, dann gehts…

Lösung: /etc/vsftpd.conf:

guest_enable=YES

Nach login: 500 OOPS: cannot change directory:/nonexistent

Geht auch nicht mit Usern, die wirklich existieren.

Lösung: Folgendes darf nicht in der /etc/vsftpd.conf stehen:

ftp_username=nobody
guest_username=nobody

Auskommentieren!


Zumindest bei meinem Debian gibt es keine Datei /lib(64)/security/pam_pwdfile.so.

Das Paket wird nicht standardmässig installiert. Fehlermeldung von vsftpd gibt es keine; lediglich die /var/log/auth.log gibt einen Hinweis darauf.

Man kann das Paket leicht nachinstallieren:

apt-get install libpam-pwdfile
 
Nach oben
ftp/server/webdav.txt · Zuletzt geändert: 2024/02/29 13:36 von 127.0.0.1
chimeric.de = chi`s home Creative Commons License Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0
DFmW2CEce3htPL1uNQuHUVu4Tk6WXigFQp   Dogecoin Donations Accepted Here    DFmW2CEce3htPL1uNQuHUVu4Tk6WXigFQp  DFmW2CEce3htPL1uNQuHUVu4Tk6WXigFQp