Nvidia

Ist Cuda da?

nvidia-smi
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 470.223.02   Driver Version: 470.223.02   CUDA Version: 11.4     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  NVIDIA GeForce ...  Off  | 00000000:07:00.0 N/A |                  N/A |
| 26%   40C    P8    N/A /  N/A |   2022MiB /  3011MiB |     N/A      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                                  |
|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |
|        ID   ID                                                   Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

Grafikkarte ansehen:

lspci -vnn | grep VGA -A 12

07:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK110 [GeForce GTX 780] [10de:1004] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: NVIDIA Corporation GK110 [GeForce GTX 780] [10de:104b]
	Flags: bus master, fast devsel, latency 0, IRQ 65, IOMMU group 13
	Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
	Memory at e8000000 (64-bit, prefetchable) [size=128M]

Are the Nvidia Geforce 9600GT supported on Kubuntu 9.04?

Quelle1)

Short how to:

  1. press ctrl-alt-f1
  2. login using you're username and password
  3. do 'sudo /etc/init.d/kdm stop'
  4. cd to the directory where you downloaded the driver
  5. there, do 'sudo sh NVIDIA-Linux-x86-180.51.pkg1.run' and follow instructions (it's mostly just a matter of pressing ok and yes a bunch of times)
  6. when the installer is finished, do ctrl-alt-f7 or 'sudo reboot'

one thing that I used to have to do is add the boot options noapic and nolapic. You can do this at boot time by going to the grub menu to see if it works…if it does, then you can add it as default…I'm grasping at straws here, but it is worth a try…if you need help on how to add these, let me know…


I reviewed the thread – I don't see a couple of things mentioned, that might make a difference:

1. Before running the downloaded installer, you should have installed the linux-headers-`uname -r` and build-essential packages.

2. After running the downloaded installer, and BEFORE issuing the startx command, you should run the

sudo nvidia-xconfig

utility.

If you're not sure about whether you did these, back up your xorg.conf file

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak28apr09

and then run through the driver installation process again and make sure not to skip the

sudo nvidia-xconfig

step.


1. Before running the downloaded installer, you should have installed the linux-headers-`uname -r` and build-essential packages.

2. After running the downloaded installer, and BEFORE issuing the startx command, you should run the

sudo nvidia-xconfig

utility.

If you're not sure about whether you did these, back up your xorg.conf file

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak28apr09

and then run through the driver installation process again and make sure not to skip the

sudo nvidia-xconfig

step.


Are you exiting the GUI with Ctrl-Alt-F1, and shutting down the X server with

sudo /etc/init.d/kdm stop

before you run the installer?


When you try again, this is how I do it:

  1. Download the nvidia driver you want. leave it in your home directory.
  2. sudo apt-get install build-essential linux-headers-'uname-r' (not sure on the 'linux-headers')
  3. boot into recovery mode, and drop to root shell
  4. enter cd /home/username
  5. enter sh NV {and press tab}
  6. go through the install process, and allow the installer to update your xorg.

a couple things…I know that I shouldn't use a root shell on my /home directory…but I have never had a problem doing it this way…also, the installer will throw a few warnings, but again, it always works.

works for me…

 
Nach oben
nvidia.txt · Zuletzt geändert: 2024/02/29 13:36 von 127.0.0.1
chimeric.de = chi`s home Creative Commons License Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0
DFmW2CEce3htPL1uNQuHUVu4Tk6WXigFQp   Dogecoin Donations Accepted Here    DFmW2CEce3htPL1uNQuHUVu4Tk6WXigFQp  DFmW2CEce3htPL1uNQuHUVu4Tk6WXigFQp