dmin admin Admin AirTies RT-210
Alcatel PBX 4400 Port 2533 kermit kermit unknown thanks to Nicolas Gregoire
Alcatel PBX 4400 Port 2533 dhs3mt dhs3mt unknown thanks to Nicolas Gregoire
Alcatel PBX 4400 Port 2533 at4400 at4400 unknown thanks to Nicolas Gregoire
Alcatel PBX 4400 Port 2533 mtch mtch unknown thanks to Nicolas Gregoire
nt PCs and the Internet to redirect all HTTP (TCP port 80) traffic to the Squid server on TCP port 3128, which is the Squid server's default TCP por... o add the word "transparent" to the default "http_port 3128" statement. In this example, Squid not only listens on TCP port 3128 for proxy connections, but will also do so in transparent mode.
<code>
http_port 3128 transparent
</code>
=== Configuring iptable... ly the Squid server has access to the Internet on port 80 (HTTP), because all HTTP traffic, except that
OG_WAVEBOX key no yes
#
# Logging der Wavebox via Port 12001 aktivieren? (no/yes)
# Die Voreinstellung i...
dann kann die Ausgabe der [[wavebox]] via TCP/IP-Port 12001 mitgelesen werden.
=== LEMMI_LOG_WAVEBOX_B... OG_KMSG key no yes
#
# Logging von /proc/kmsg via Port 12002 aktivieren? (no/yes)
# Die Voreinstellung i... nn kann die Ausgabe von [[/proc/kmsg]]
via TCP/IP-Port 12002 mitgelesen werden.
=== LEMMI_LOG_RECLOG ==
== 4 ==
Time to forward a port
- add the port forward feature to the ssh command: '-L <local port>:system:<remote port>'
- '-L 1234:localhost:6667' would be my local system listening on port 1234 and sending requests to port 6667 of the remote's local loopback address (127.... - ssh -i /<user's home dir>/.ssh/id_rsa -L <local port>:system:<remote port> <remote user>@<ip address>
- ie: 'ssh -i /roo...
* 2.set your irc client to connect locally on port 1234 which should forward the request to the remo
===
Important settings are:
* Select a USB port for uploading the firmware under Serial Flasher Config -> Default serial port
* Ensure that Partition Table -> Parititon Tabl
also specify a DEVICE, sometimes referred to as a port.
# For USB UPSes, please leave the DEVICE directi... other UPS types, you must specify an appropriate port or address.
#
# UPSTYPE DEVICE Descri... for most installations.
#
# net hostname:port Network link to a master apcupsd
# ... onnected to your computer.
#
# snmp hostname:port:vendor:community
# SNM
port_enable=yes
# FTP Server lauscht i.d.R. auf Port 22, aber die Verlegung auf Port 2222 ist sicherer
listen_port=2222
</code>
=== Zertifikat erstellen ===
SSL-Verschlüsselung benötigt
/kdm/kdmrc section [xdmcp] to
> Enable=true and Port=177 but noone is listening on UDP port 177 after
> restarting kdm.
>
> I also trie... luss die Zeile:
<code> DISPLAYMANAGER_XSERVER_TCP_PORT_6000_OPEN="no"</code>
Das muss man wohl auf "yes
n a standard IBM PC/AT keyboard into the keyboard port (note that this PC has an old-fashion 5-pin DIN p... ommand responses by connecting a PC to the serial port (9600 baud, 8, N, 1) and by having the PC run a t... s
PTY Check status of COM / Printer port
Usage:
pty < stat [N] >
PUB ...
TERM Manage the serial (terminal) port
Usage:
term < on | off | capslock | contr
